Motorola Solutions

Portable Radio: APX2000
GPS AntennasPrint
Single-band antenna for APX portable radios integrates GPS and has an optimum length designed for higher gain to maximize range.
Whip/Heilcal Antennas
PMAE4065 Antenna Whip UHF(380M-520M)/GPS
NAF5085 Antenna Whip 700/800(764M-870M)/GPS
NAR6593 Antenna Helical VHF(136M-174M)/GPS
Stubby Antennas
This stubby quarterwave antenna is ideal when radio is worn on the belt because the short antenna is non-obtrusive.
   
FAF5259 ASSY,ANT,UHF(380M-470M) R1 Plus GPS Stubby Antenna
FAF5260 ASSY,ANT,UHF(470M-520M) R1 Plus GPS Stubby Antenna
NAR6595 ANT 1/4 Wave 7/800(764M-870M) Stubby/GPS
   
Audio Accessories
Motorola's range of audio accessories integrates perfectly with Motorola radio to provide a personalised two-way radio solution. Built with the highest quality standards, Motorola accessories are specially engineered to assure maximum performance of your radio. Designed as a complete solution, our extensive range of audio accessories from remote speaker microphones, headsets to surveillance kits will provide you the flexibility for hands-free operations to enhance your work productivity.
Speaker Microphone
Remote Speaker Microphone
Remote Speaker Microphone provides greater operational flexibility to transmit and receive message without removing the radio from the belt or carrying case.
   
PMMN4024 Remote Speaker Microphone with 3.5mm Audio Jack. In addition to having windporting technology, the RSM also includes a 3.5 mm audio jack to accept secondary receiver audio accessories for discrete communication.
PMMN4040 Remote Speaker Microphone Submersible (IP57) without Audio Jack. The RSM incorporates both wind porting technology and waterproof capability. The IP57 submersible RSM is tested at 1 meter for 30 minutes which is ideal for outdoor radio communication in wet conditions.
PMMN4065 Standard Large IP57 RSM (based on PMM4046 w/ larger speaker)
PMMN4069 Large RSM with audio jack
PMMN4062 Large Plus Noise cancelling RSM IP55 3.5MM jack RX only
Impres Remote Speaker Microphone
IMPRES Smart Audio System
Motorola's state-of-the-art IMPRES technology enables optimal audio performance and increased customisation, assuring the highest quality communication. This is achieved through enabling communication between the radio and the audio accessories

Optimal Audio Performance
When an IMPRES accessory is attached, accessory identification is sent to the radio enabling the radio to optimise its output for each type of audio accessory.This results in more consistent output across all audio accessories.

Enhanced Audio Gain Capabilities
IMPRES audio accessories have significantly enhanced audio gain capabilities. Regardless of whether the user is speaking quietly or at normal volume, directly or indirectly into the microphone, the IMPRES audio can detect the condition and will automatically adjust the gain such that the person on the receiving end hears a clear transmission.

Windporting microphones
In exposed environments, users of conventional microphones will often experience disruption in voice clarity, when transmitting in windy environments. Wind moving past the microphone unit has the potential to disrupt safety or business critical messages. The trademark design of Motorola’s windporting microphone’s, created a solution that cancelled the mechanical effects that wind has on the microphone. Through research and field testing, Motorola determined the positioning of the microphone on the unit and the size of the microphones opening port, to protect the microphone from the mechanical movement caused by wind flow onto the microphone membrane. So that you can hear the difference of the enhancement to transmission and reception of voice communications in extreme wind environments with windporting technologies please click the audio clip here : Wind porting sound for RSM.Any industry which relies on communicating in environments exposed to wind, can benefit from clarity of voice transmission. The construction industry, mining industry and shipping industry are all examples of environments where windporting is critical for effective communication between workers.

Noise-cancelling microphones
Loud ambient noise environments pose a challenge for many industries because the noise is detrimental to clarity of voice and message transfer in their communications systems. Conventional microphones don’t have the technology in place to prevent high ambient noise overriding speech or the distortion created by loud noise when transmitting audio. A revolutionary technology was designed called the noise-cancelling microphone which allows speech to be transmitted clearly in high ambient noise environments. Noise-cancelling acoustics utilise a series of directional microphones on the unit that are designed to eliminate ambient noise coming from both sides of the unit (front and back). The microphone unit itself has two microphones which are positioned, one on each side of the unit. When loud ambient noise is received on one side of the microphone it is also received on the other side of the microphone and these noises cancel each other out. This leaves voice as the only audio that is transmitted through the microphone. Imagine a situation, where a worker was about to make a vital mistake in a high ambient noise environment but was quickly prevented by a clear instruction over his radio from his supervisor who was observing in the same environment. The noise-cancelling technology allowed the transmission of instructions to be clearly stated without disruption to what needed to be transmitted.

Benefits of this technology are recognised over many industries, which rely on clear communication in loud environments for safety and to conduct their business. Industries such as construction, mining, security (at a rock concert) and airports are examples of where these technologies really stand out as a critical application.
   
PMMN4046 The remote speaker microphone boasts a revolutionary IMPRES technology, wire porting technology and waterproofing capability. The IP57 submersible RSM is tested at 1 meter for 30 minutes which is ideal for outdoor radio communication in we conditions. The volume control feature enables the user to adjust the radio volume without having to touch the radio.
PMMN4050 The remote speaker microphone boasts a revolutionary IMPRES technology and noise cancellation technology that is designed to eliminate ambient noise. Ideal for communication in noisy environment.
PMMN4025 IMPRES Remote Speaker Microphone with 3.5mm Audio Jack & Emergency Button
HMN4101A IMPRES Non-Display Submersible RSM(non-DRSM) w/ Jack, no Chnl
RMN5116A Rx/Tx Boomless Bone Conductive Temple Transducer for DRSM/non-DRSM
Optional Remote Speaker Microphone Accessories
AARLN4885 Receive Only Earpiece with 3.5mm
PMLN4620 D-SHELL Receive-Only Ear-Receiver (with 3.5mm plug)
RLN4941 Receive Only Earpiece with 3.5mm transparent tube and rubber eartip
WADN4190 Receive Only Flexible Earpiece
RLN6424 Rx-Only earpiece with translucent tube and rubber eartip
Standard Earpiece/Earset
This Ultra lightweight D-Style earpiece is comfortable and can be worn on either ear. The innovative and stylish design allows for hands-free communication. It offers an in-line Push-to-Talk button for ease of use.
D-Hook Earset
PMLN5096 D-Shell earset with Boom Microphone
Surveillance Kits
Surveillance kits are unobtrusively designed, making them the ideal audio accessories for effective communication in covert operations.
Covert Surveillance Kits-1
Surveillance Kits-1 earpieces can be easily concealed and camouflaged to allow discrete communications. Surveillance kits also come with microphone and PTT. The earpiece is designed to allow users to use optional accessories to enhance its operational capability.
   
PMLN6126 Core 1 wire RX only Surveillance- beige
PMLN6125 Core 1 wire RX only Surveillance- black
PMLN6128 IMPRES 2 Wire Surveillance – beige
PMLN6127 IMPRES 2 Wire Surveillance – black
PMLN6129 IMPRES 2-wire Surveillance with acoustic tube - black
PMLN6130 IMPRES 2-wire Surveillance with acoustic tube - beige
PMLN6123 IMPRES 3-wire Surveillance with acoustic tube - black
PMLN6124 IMPRES 3-wire Surveillance with acoustic tube - beige
RLN6281 Replacement Foam Plugs – 25/pak
RLN6282 Replacement Ear Tips, Clear – 25/pak
RLN6242 Quick Disconnect Acoustic Tube Replacement
Clear Comfortable Earpieces for Surveillance Kits-1
The Clear Comfortable Earpiece forms to the inside of the ear and is perfect for low noise environments. It’s made of easy-to clean, chemically-inert, hypo-allergenic material. Compatible with RLN6232A and all Noise and Surveillance Kits.
   
RLN4760 Small Custom Earpiece - Right Ear
RLN4761 Medium Custom Earpiece - Right Ear
RLN4762 Large Custom Earpiece - Right Ear
RLN4763 Small Custom Earpiece - Left Ear
RLN4764 Medium Custom Earpiece - Left Ear
RLN4765 Large Custom Earpiece - Left Ear
Covert Surveillance Kits-2
In addition to the benefits of discreet communications like surveillance kits-1, these surveillance kit-2 earpieces allow quick disconnect from BDN6783 by simply unthreading from its 3.5 mm audio jack providing better convenience and flexibility
The following Surveillance Kit-2 accessories require the BDN6783 (3.5 mm threaded adapter jack) that attaches to the radio, unless being used with speaker/microphone.
   
BDN6664 1-wire Surveillance Earpiece Beige (3.5mm threaded) (Requires adaptor order separately)
BDN6665 1-wire Surveillance Extra Loud Earpiece Beige (3.5mm threaded) (Requires adaptor order separately)
BDN6666 1-wire Surveillance Earpiece with volume control Beige (3.5mm threaded) (Requires adaptor order separately)
BDN6667 2-wire Surveillance Earpiece with combined Mic/PTT Beige (3.5mm threaded) (Requires adaptor order separately)
BDN6668 3-wire Surveillance Earpiece with separate Mic/PTT Beige (3.5mm threaded) (Requires adaptor order separately)
BDN6669 2-wire Surveillance Extra Loud Earpiece with combined mic/PTT Beige (3.5mm threaded) (Requires adaptor order separately)
BDN6670 3-wire Surveillance Extra Loud Earpiece with separate mic/PTT Beige (3.5mm threaded) (Requires adaptor order separately)
BDN6726 1-wire Surveillance Earpiece Black (3.5mm threaded) (Requires adaptor order separately)
BDN6727 1-wire Surveillance Extra Loud Earpiece Black (3.5mm threaded) (Requires adaptor order separately)
BDN6728 1-wire Surveillance Earpiece with volume control Black (3.5mm threaded) (Requires adaptor order separately)
BDN6729 2-wire Surveillance Earpiece with combined Mic/PTT Black (3.5mm threaded) (Requires adaptor order separately)
BDN6730 3-wire Surveillance Earpiece with separate Mic/PTT Black (3.5mm threaded) (Requires adaptor order separately)
BDN6731 2-wire Surveillance Extra Loud Earpiece with combined mic/PTT Black (3.5mm threaded) (Requires adaptor order separately)
BDN6732 3-wire Surveillance Extra Loud Earpiece with separate mic/PTT Black (3.5mm threaded) (Requires adaptor order separately)
Surveillance Kits -2 With Extended-Wear Comfort Earpiece
These kits include an extended-wear comfort earpiece with rubber eartip and Quick Disconnect clear, comfortable acoustic tube. Users hear transmissions clearly, and the clear tube provides a discreet appearance.
   
RLN5314 Comfort Earpiece, Receive-Only, Beige
RLN5313 Comfort Earpiece, Receive-Only, Black
RLN5311 Earpiece with Microphone and PTT Combined (2-Wire), Beige
RLN5312 Earpiece with Microphone and PTT Combined (2-Wire), Black
Surveillance Kit-2 Accessories
5080369E38 Standard Earpiece Assembly (earphone, earloop, eartip), Beige
5080369E39 Extra Loud Earpiece Assembly (earphone, ear-loop, eartip), Beige
5080369E40 Plastic Urethane Earloop
5080370E97 Eartip Standard Clear
Noise Kit for Surverillance Kits-2
Lightweight translucent tube attaches to Motorola surveillance accessories. Clothing clip prevents the accessory from being pulled from the ear due to body movement or head rotation.
   
5080384F72 Replacement Foam Plugs; pack of 50
RLN6242 Quick Disconnect Acoustic Tube Replacement
RLN6231 Extreme Noise Kit. Includes 2 Foam Ear Plugs for Noisy Environments and provides 24dB of Noise Reduction. (Beige)
RLN6230 Extreme Noise Kit. Includes 2 Foam Ear Plugs for Noisy Environments and provides 24dB of Noise Reduction. (Black)
RLN6241 Low Noise Kit. Includes Rubber Ear Tip for Low Noise Environments. (Beige)
RLN6232 Low Noise Kit. Includes Rubber Ear Tip for Low Noise Environments. (Black)
Clear Comfortable Earpieces for Surveillance Kits-2
The Clear Comfortable Earpiece forms to the inside of the ear and is perfect for low noise environments. It’s made of easy-to clean, chemically-inert, hypo-allergenic material. Compatible with RLN6232A and all Noise and Surveillance Kits.
   
RLN4760 Small Custom Earpiece - Right Ear
RLN4761 Medium Custom Earpiece - Right Ear
RLN4762 Large Custom Earpiece - Right Ear
RLN4763 Small Custom Earpiece - Left Ear
RLN4764 Medium Custom Earpiece - Left Ear
RLN4765 Large Custom Earpiece - Left Ear
Secured Bluetooth Wireless Audio Accessories
The secured Bluetooth kits(requires in-country Type Approval) allows the freedom of radio communications without the dangling wires that improve radio communications and work productivity. These kits are also FM approved. 
   
NTN2573 Mission Critical Wireless Earpiece (9.5 inch cable) with US plug USB charger
NTN2570 Mission Critical Wireless Earpiece (12 inch cable) with US plug USB charger
NTN2571 Mission Critical Wireless Push-to-Talk with US plug USB charger
NNTN8188 Mission Critical Wireless Push-to-Talk(Need to order NTN2572/75 & PMPN4006 separately) 
NTN2572 Earpiece  W/12" cable   
NTN2575 Earpiece  W/9.5" cable   
PMPN4006 US/EU/UK plug USB charger
Headset
Enabling hands-free communication, the headset acts as a great productivity tool. Users can chose from Light Weight Headsets which are suitable in low noise environments to Heavy Duty Headsets with noise reducing ratings.
Light Weight Headset
Light weight headsets allow high-clarity, hands-free, two-way communications while adding comfort for extended wear in moderate noise environments.
   
RMN5058 IMPRES Lightweight Headset Single-Muff, Adjustable, with Boom Microphone, In-Line PTT Switch
RLN6283 Replacement Foam Ear pad and Windscreen Kit
PMLN5102 Ultra-Light Headset with Boom Microphone & In-line PTT/VOX Switch
Heavy Duty Headset
Heavy duty headset includes noise cancelling boom microphones and can be worn with or without a hardhat. Headsets are for use in high noise levels.  The Push-to-Talk switch is located on the earcup.
   
PMLN5275 Behind the Head Heavy Duty Headset with Noise-Cancelling boom microphone
75012068001 Foam Ear Seal
15012094001 Replacement cloth Cover for ear seals
4204004K01 Over the Head Strap
6775998M01 Mic O-Ring
3578010A01 Headset Windscreen
7575999M01 Eyeglass Pad
Ear Microphone System
Conventional microphones pick up both the user's speech and the ambient noise in outgoing radio transmission. The compact Ear Microphone System, on the other hand, picks up mainly speech-induced vibrations in the ear canal. The bone vibrations come from the speech impulses generated by the user's vocal chords. The ambient noise rarely gets into such microphone. This provides a very clear voice signal(with minimal ambient noise pickup) in outgoing radio transmissions. The miniture earpiece also leaves the face unobscured when worn by rescue and hazard protection personnel, who still retain the ability for direct hearing and speaking. For personnel required to wear breathing apparatus, communications with protective masks are as clear as communications without. And its high speech clarity under noisy environments makes it ideal for high noise environments.
   
PMLN5653 IMPRES Ear Mic System
Temple Transducer
The temple transducer allows the user to hear external sounds from both ears while receiving radio communications in noisy environments. The receiver portion of the accessory rest on the temples and is capable of converting the received signal from a two-way radio into sound vibrations. The sound vibration is transmitted through surrounding human issue and bone directly into the inner ear where it is received by the user. User wearing ear plugs still can "hear" the radio messages
   
PMLN5101 IMPRES Temple Transducer
CommPort
Integrated Microphone/Receiver System
The CommPort allows the user to speak in a whisper and hear in a crowd. Using the latest in Digital Signal Processing(DSP) technology, the CommPort system make it possible to hear and speak under the most adverse conditions. The CommPort does not block out normal hearing so important background sounds can still be heard. The special microphone located on the earpiece picks up the user's audio without speaking into it.This kit comes in different PTT options: Basic PTT, Palm PTT, Snap-on-side and Body PTT.
   
RLN6484 Integrated Ear Microphone/Receiver System w/Body PTT (includes BDN6783 3.5mm jack adapter)
RLN6480 Integrated Ear Microphone/Receiver System with Palm PTT (includes BDN6783 3.5mm jack adapter)
RLN6481 Integrated Ear Microphone/Receiver System with PTT on Radio Adapter (includes BDN6783 3.5mm jack adapter)
RLN6483 Integrated Ear Microphone/Receiver System w/Ring PTT (includes BDN6783 3.5mm jack adapter)
RLN6482 Integrated Ear Microphone/Receiver System w/Snap-On-Side PTT (includes BDN6783 3.5mm jack adapter)
Replacement kit
4202006A01 Replacement Back Cover Clip
4285838B01 Replacement Collar Clip
NKN5610 Replacement Palm PTT Cable for Professional Radio and Astro Series
NKN6508 Replacement Cable for NTN1625A
NKN6510 Replacement Cable for NTN1624A
NKN6512 Replacement Ring PTT Cable for Professional Radio and Astro Series
NKN6525 Replacement Snap-On-Side PTT Cable for Professional Radio and Astro Series
NKN4188 Replacement Body PTT Cable for Professional Radio and Astro Series
NTN8821 CommPort Maintenance Kit, includes replacement ear tubes (quantity 10) windscreens (quantity 2)
NTN8986 Adhesive Pads (quantity 90) for secure attachment to ear
NTN8988 Ear Straps (quantity 10) for secure attachment to ear
   
Batteries
Motorola Original batteries are available in a variety of chemistries and capacities, designed to work hand in hand with your 2-way radios to ensure optimised performance and safety for your business. Motorola design batteries giving utmost importance to safety by using redundant safety circuits. Motorola pays close attention to details(latch mechanism, belt clip, battery housing to prevent unwanted disengagement and accidental damage. Motorola uses advanced manufacturing processes to ensure consistent battery performance. High graded pre-sorted cells are used ensuring superior quality and reliable battery.)
Lithium Ion (LiIon)
NNTN8128 IMPRES BATT IMP STD LI ION 1900M 2000T
NNTN8129 BATT IMP FM LI ION 2300M 2350T
PMNN4424 IMPRES BATT IMP LI ION 2300M 2350T
PMNN4448 IMPRES Hi-cap li-ion battery(2700mAh) W/Box
   
Carrying Accessories
Hard leather carry cases secure and protect radio.
Leather Carry Accessories
PMLN5950 APX2000 Leather Carry Case w/2.5 in swivel belt loop
PMLN6085 APX2000/4000 SW LEATHER CARRY CASE2
Belt Clips
Belt clips are tested with strong pulling forces so to prevent radios from slipping away from user's belts even in harsh environments.
 
PMLN4651 2-INCH BELT CLIP
PMLN7008 2.5-INCH BELT CLIP
Adapters
BDN6783 AUDIO ACCY ADPT 3.5MM W/PTT
NNTN7869 APX SURVEILLANCE KEYLOAD ADAPTER
Optional Carry Accessories
Water Proof Bag
HLN9985 Waterproof Bag, includes large carrying strap
Carrying Straps
NTN5243 Adjustable Black Carrying Strap, attaches to D rings on case
Chest Packs
Allows portable radio to be mounted on chest.
   
HLN6602 Universal Chest Pack with Radio Holder, Pen Holder, and Velcro Secured Pocket
1505596Z02 Replacement Strap for HLN6602
RadioPAK
It’s different from all other holders or cases: more comfortable, more useful and more stylish. Worn around the waist, it holds two-way, iDEN portables or cellular phones right at hand. Includes a separate 6"x8" zippered pouch for other on-the-job necessities. Adjustable nylon weave belt; fits both men and women.
   
RLN4815 RadioPAK™ Radio/Utility Case
4280384F89 Universal RadioPAK™ Belt Lengthener; fits waists larger than 40"
Break-a-Way Chest Pack
RLN4570 Break-A-Way Chest Pack
Belt
4200865599 3.0" Wide Black Belt
   
Chargers/Vehicular Accessories
Designed to work as a total system with the 2-way radio and the battery, Motorola original chargers keep your battery in tip-top condition and maximise battery life.
Impres Single Charger
Impres smart charger automatically customises its operations to the user's unique charging habits. The impres charger is actually three units in one: a rapid charger, a conditioning charger and when necessary a reconditioner. Get rid of the guesswork and get more from every battery. Get the most out of every battery and eliminate the surprise of “low battery alerts”. IMPRES chargers tell you exactly how much capacity is in an IMPRES battery before you attach it to your radio and exactly when an IMPRES battery has reached the end of service life. The impres charger uses advanced algorithms to maximize talktime and optimise impres battery life cycle that results in 40% more life cycle as compared to non-impres batteries.
   
AZWPLN4232 IMPRES Single Unit Charger, US 2 Pin
AZWPLN4233 IMPRES Single Unit Charger, UK 3 Pin
AZWPLN4234 IMPRES Single Unit Charger, EURO 2 Pin
WPLN4245 IMPRES Single Unit Charger, China Plug
WPLN4249 IMPRES Single Unit Charger, SMPS Korea Plug
impres Multi Charger
Impres smart Multi unit charger automatically customises its operations to the user's unique charging habits, 6 batteries at one go. The impres charger is actually three units in one: a rapid charger, a conditioning charger and when necessary a reconditioner. Get rid of the guesswork and get more from every battery. Get the most out of every battery and eliminate the surprise of “low battery alerts”. IMPRES chargers tell you exactly how much capacity is in an IMPRES battery before you attach it to your radio and exactly when an IMPRES battery has reached the end of service life. The impres charger uses advanced algorithms to maximize talktime and optimise impres battery life cycle that results in 40% more life cycle as compared to non-impres batteries. Display impres multi unit chargers provide critical information on its impres batteries(actual mAh, final mAh upon fully charged, serial numbers,etc..)
   
WPLN4212 IMPRES™ MUC, Non Display, 110-230V, US Cord
WPLN4213 IMPRES™ MUC, Non Display, 110-230V, EU Cord
WPLN4214 IMPRES™ MUC, Non Display, 110-230V, UK Cord
WPLN4217 IMPRES™ MUC, Non-Display, 110-230V, KOREAN Plug
WPLN4224 IMPRES™ MUC, Display, 110-230V, KOREAN Plug
WPLN4219 IMPRES™ MUC, Display, 110-230V, US Cord
WPLN4221 IMPRES™ MUC, Display, 110-230V, UK Cord
WPLN4220 IMPRES™ MUC, Display, 110-230V, EU Cord
PMLN5256 IMPRES™ MUC, Display, 110-230V, JAP Cord
RLN5382 Charger Display Module for IMPRES Multi-Unit Charger
NLN7967 Wall Mounting Bracket
Charger Inserts
NNTN8169A APX2000 Battery Inserts for XTS SUC
NNTN8170A APX2000 Battery Inserts for XTS MUC
Vehicular Charger
NNTN7616 MotoTRBO Vehicular Charger
This 12 Volt DC charger is ideal for mobile use. It charges portable radio NiCd batteries in rapid-rate charge mode (less than 3 hours) until full charge is obtained and then switches to trickle charge mode. A micro-processor controls the charge rate. This durable unit comes with a metal mounting bracket.
RLN6433 MotoTRBO Travel Charger
Its small compact design allows the radio to be used while rapid charging in the charger base. Unit includes a voltage regulated vehicular charger adapter, custom charger base, mounting bracket and coil cord.
Charger Software and Accessories
NNTN7979*** IMPRES Battery Fleet Management Software
HKVN4039^  Software license key for Battery Fleet management Software
NNTN7677 Multi-Unit Charger Interface Unit for IMPRES Battery Fleet Management
NNTN8045 Single-Unit Charger Interface Unit for IMPRES Battery Fleet Management
NNTN7392 IMPRES Battery Reader
   
***NNTN7979 is a DVD containing the application software for Fleet management. With this software
alone, you can only read the data information from the IMPRES batteries when connected together with the Charger Interface Units.

^The software license key after keying into the installed fleet management software will expand the following fleet management capabilities:
1) Generate and print out predefined or customized reports
2) Upgrade to a large fleet management network consists up to the maximum of 20 personal computers
 
Resources
   
Compability Matrix
   

Temple Transducer

Motorola Revolutionary Remote Speaker Microphones

Great Tips for Greater Battery Performance

Accelerated Life Testing ensures unsurpassed Motorola quality

Rely on genuine Motorola accessories

Temple Transducers "utilising bone conduction technology"

 

 

Antennas | Audio Accessories | Batteries | Battery Maintenance Plus Analyser | Carrying Accessories | Chargers/Vehicular Accessories | Compatibility Matrix
A8 | A10/A12 | ATS2500 | CB245 | CP1100/CP1180 | CP1200/1300/1600/1660 | CP477 | DTR2450/2430 | GP2000/2000s/2100 | GP3188/3688 | GP328/338/329/339 | GP328Ex/GP339Ex/PTX760Ex (ATEX) | GP328plus/338plus | GP628 Plus/GP638 Plus | LTR PRO Series | MTP700/750 | MTP850 | MTP3100/MTP3200/MTP3250 | MTP6550/MTP6750 | MTP850 Ex | MTX900/960 | PacerPlus | PTX700 | PTX700plus/760plus | PTX860 Plus | SKS245 | SP66 | XiR P8200/P8208/P8260/P8268 | SL1K | SL1M | XiR E8600 E8608 | XiR P8600/P8608/P8620/P8628/P8660/P8668/GP328D/GP338D | XiR P8608/P8668 EX | XiR P6600/6608/6620/6628 | XiR P3688 | XTNi/XTNiD | XTS2500 | XTS3000/XTS3500/XTS5000 | APX2000 | APX5000/APX6000/APX7000